The RIA console
Talk to RIA on screens that have no conversation of their own, from a pane you can open, move and resize anywhere, and know how the message box, attachments and replies work wherever you talk to RIA.
Where: RIA diamond (lower right)
RIA, eode's assistant, talks with you in one of two places. On a model's page, a what-if's page and a workspace's page, the conversation is the page itself, with what you're working on beside it. On the other screens, such as Models, Datasets and the Scenarios and Workspaces lists, RIA is the console: a small diamond over the page that opens into a pane with the conversation and a message box. RIA knows your screen, model and scenario, so "this" needs no name.
Know where you talk to RIA
| Where you are | Where RIA is |
|---|---|
| Home | Home's own box: Tell RIA what you want |
| A model's page (Read a model's record), a what-if (Run a what-if), a workspace (Workspaces), and New model, New scenario and New workspace | The conversation on the page: Talk to RIA on a page |
| A workspace in fullscreen | Nowhere until you leave fullscreen |
| Every other screen | The console |
The message box, attachments and RIA's replies work the same in both places; they're described on this page.
Open and close the console
Click the diamond, or focus it and press Enter or Space (Open RIA chat); the cursor lands in the message box. To close, click X in the pane's header (Collapse RIA chat) or press Esc anywhere in the pane; focus goes back to the diamond. A new browser starts with the console closed.
- On a window 640 pixels wide or less, the open console fills the whole window, with no drag or resize.
- Opening and closing animate, unless Motion in Page settings or your system's reduced-motion setting says to reduce.
Move and resize it
- Move the diamond: drag it anywhere; it stays there in this browser. A press that moves less than 4 pixels counts as a click.
- Move the open pane: drag its header (not up under the app's top bar). Close a dragged pane and the diamond moves under where it was.
- Resize: drag the pane's left edge (Resize RIA console); double-click it for the default width. The width is kept in this browser.
The pane opens centered on the diamond, 7/8 of the window tall, and always stays whole on screen.
With a model open, the console holds that model's conversation, the same one as on the model's page; with none open, a general one. On a screen that isn't about one model, such as Models or Datasets, a line under the header reads No model open: "Ask about your models, or start a new one."
Talk to RIA on a page
On a model's, a what-if's or a workspace's page, the conversation fills the page, with The record, The scenario or The workspace in a pane beside it. There's no diamond, and you can't move or close the conversation; closing the pane beside it gives it the whole width.
- One conversation per page. Everyone who opens the page sees the same conversation. Anyone who can
change the model writes in it; anyone else reads it, under "You can read this page's conversation.
People who can change this model ask RIA here." While RIA answers someone else, the line reads RIA is
answering
<name>… - Stop: while RIA is answering, or a what-if is solving, Stop sits under the send arrow. It stops RIA's turn and the work it started, then says Stopped., or Nothing was running.
- New message below: if you scroll up to read, the conversation stays where you are and this button takes you back to the newest message.
- Datasets: on a model's page, Select datasets adds datasets you've uploaded to your next message; each shows as a chip you can leave out again. Once the model holds its data, the controls fold to one line, Data: and the datasets' names, with Add or change.
A page's conversation with nothing in it opens with a greeting that names the page, and a few questions to start with under the message box. Clicking one sends it as your message.
| Page | Greeting | Questions |
|---|---|---|
| A model | Ask about <model> | What does it decide?, Walk me through the plan, What is holding it back?, Try a what-if |
| A what-if | Ask about scenario <name> | How does it differ from Base?, What is binding here?, Explain the result, What should I try next? |
| A workspace | Ask about this board | Summarize this board, Compare its scenarios, What should I look at first? |
New model, New scenario and New workspace open as conversations of their own, whose first message makes the model, what-if or workspace; see New model, Run a what-if and Workspaces.
Ask RIA something
Type in the message box and press Enter, or click the send arrow (Send); Shift+Enter starts a new line. The box grows to ten lines, then scrolls. While RIA answers, the box reads RIA is still writing. Send another message to queue it. A message you send then waits, and goes as soon as RIA finishes.
There's no Retry, Regenerate, Copy or Edit button. To retry, send the message again; a message that already went through isn't run a second time.
On an empty console conversation, a Suggested row sits above the box. A chip puts its text in the box for editing; nothing is sent until you send it. The placeholder and chips depend on the screen:
| Screen | Placeholder | Suggested |
|---|---|---|
| Models | Ask which model to open, or find one by tag… | Which models are ready to promote?, Find by tag, Audit recent activity |
| Datasets | Ask about your imported data… | What have I imported?, Find a dataset |
| One dataset | Ask about this dataset… | Describe this data, Spot data problems |
| The Scenarios list | Ask about these scenarios or describe a what-if, e.g. '…', with an example from your model | Compare top 3 scenarios, Probe what's binding, Try a +10% demand swing |
| The Workspaces list | Compare, diagnose, or summarize these scenarios… | Compare to Base, What's holding the plan back, Summarize for the Go team |
| Workflows | Ask about workflows and runs… | What's running now, What needs me |
| A workflow run | Ask about this run: diagnose, compare, or summarize for sign-off… | What's left on this stage, Diagnose the at-risk scenario, Summarize for sign-off |
| Editing a workflow | Ask about stages, roles, or gates… | — |
| Review imported data | Ask about a mismatch, or what to accept… | Explain the differences |
| Change history | Ask what changed, or why a number moved… | — |
| Review Queue | Ask about the review queue… | — |
| Organization | Ask about members or roles… | — |
| Beta feedback | Ask about the product while you write feedback… | — |
| Anywhere else | Ask about this model…, or Ask RIA… with no model open | — |
On a page, the placeholder follows the page: What would you like to change about <model>? on a model's
page, the Scenarios placeholder on a what-if's, and the Workspaces one on a workspace's. While RIA asks you
something, the box invites your answer instead.
Ask for a what-if
On the Scenarios list, as everywhere, what you send goes to RIA. Ask a question and RIA answers it. Describe a change ("What if demand rises 10%?") and RIA proposes the what-if in a card that asks Would you like me to open a separate conversation for this what-if? Nothing is created until you click Yes, open it, which opens the what-if in a conversation of its own: see Run a what-if and RIA's proposals.
Attach a file
Click Upload beside the message box (Upload spreadsheet) to choose a file, or drag one onto the box. One file at a time. What happens depends on the file:
- An Excel workbook (
xlsx) or a CSV file, up to 100 MB, is added to your Datasets. The line above the box reads Uploading, then Added, and RIA reads the dataset with your next message. - A text file (
tsv,txt,md,jsonortab, up to 1,000 KB) is read in your browser and sent inside your message. Its chip shows the name,<n> KB · <n> lines, and an X (Remove), and the placeholder becomes Add context about this file (optional)…. - A
pdfordocxis attached as a design document: it stays with the conversation and can build a model straight from it. See Describe your business.
| Message | Means |
|---|---|
| This file is larger than 100 MB. Choose a smaller spreadsheet. | A workbook or CSV over 100 MB. |
| Save this workbook as .xlsx (Excel's current format) and drop it here again. | An older xls workbook. |
File too large (<n> KB). Cap is 1000 KB. | A text file over 1,000 KB. Split it, or paste the rows you need. |
| Use an Excel workbook, CSV or text file, PDF, or Word document. | Use one of those types. |
Doc too large (<n> KB). Cap is 10 MB. | A PDF or DOCX over 10 MB. |
| Session not ready yet: try again in a moment. | The conversation was still starting. Drop the file again. |
Read RIA's reply
Your messages sit on the right, RIA's on the left, with bold, italics, lists and tables rendered. The conversation scrolls to the newest line. A long conversation opens on its latest messages; Show earlier at the top reads the ones before.
| You see | What it is |
|---|---|
| A spinner and Thinking… | RIA is working on the message you sent and hasn't started a step yet. Background work never shows one. |
| A list of steps, such as Reading your model or Working out the best plan | What RIA is doing, one line per step: a check on each finished step and a spinner on the one in hand, which adds · <n> min once it has run a minute. It replaces Thinking… and goes when the answer lands. |
| A spinner line saying what a build, an import or a what-if run is doing | Work on the model on screen is running, with how long it has run. You can still ask RIA about it. |
| Working on your answer… | You answered one of RIA's cards and RIA is acting on it. |
| A spinner line saying your engine is spinning up | Your own optimization engine is starting. Clears when it's ready. |
| A spinner line saying how many are ahead of you | Your engine is busy with other work. There's no time limit on the wait. |
| Reconnecting… | The answer went quiet for a minute. The conversation reconnects once and picks up any answer that arrived meanwhile. |
| RIA is asking · reply below | RIA's last message is a short question waiting on you. |
| A dashed, quieter line | A side note from work RIA was already doing, filed above the question you're waiting on. |
| A name with a dotted underline | A link. Click it to open that scenario, model or workspace (Open this scenario). |
| A card with a check | A receipt: something RIA changed. open goes to it; Undo appears where one step reverses it, and the card then reads Undone: …. |
Resumed <title> | A conversation you reopened, or reloaded. RIA carries on from its record. |
Some answers land on the page rather than in the conversation: news factors and starter what-ifs on a scenario's screen (Run a what-if), and a build's progress on the model's record.
Reload the page and the same conversation comes back.
Let RIA take you there
Ask RIA to go somewhere and it does: Home, New model, a model's page, Models, Datasets, Scenarios (or one what-if), Change history, Review imported data, Workflows, a workspace, the Review Queue, or Beta feedback. It skips a model screen when there's no model to open it on.
See what RIA is looking at
Above the message box, a strip labeled Model names the model on screen and, after ›, the scenario it's on. It follows the screen; it isn't a control that changes what RIA reads. The pencil beside the model's name (Rename model) renames the model, everywhere it's listed. In a new scenario's or workspace's conversation, no scenario is named until your first message makes one. During a workflow run, the strip names the run's model, and a Workflow / Stage card sits at the top of the console. Every message also tells RIA the screen you're on, the open workspace and your persona.
When you click Have RIA prewrite a reply on a change order's card (RIA's proposals), a working on chip names the change order: "this" now means that item, whichever screen you're on. Its X (Unpin change order) lets go, and so does setting the change order aside or dismissing it.
Buttons that write in the message box
Some buttons put words in the page's message box for you to finish and send:
| Button | Where | Puts in the box |
|---|---|---|
| Ask RIA to help fix these | The validation drawer, opened from a scenario's screen, with a check failing | The failing checks |
| Approve on a request to build | Home | The request, and opens the model's page |
| A board's buttons that ask RIA for tiles | A workspace's page | The start of a request; see Workspaces |
Nothing is sent until you press Enter.
Know when RIA has finished
On the console, the diamond carries the only signal. Its status dot pulses while RIA works (RIA is working…), while the model on screen builds or imports, and while a model is registering or uploading. With the console closed, an accent dot appears when RIA leaves a proposal or starter what-ifs you haven't seen (New from RIA); a plain answer, a finished build or a receipt doesn't light it. On a page, the conversation itself shows RIA at work. There are no pop-ups, sounds, tab-title changes or browser notifications. Requests RIA leaves from work in the background, and long solves, show on Home.
Limits
- Console width 300 to 640 pixels, 380 by default. Height 7/8 of the window.
- The diamond keeps 8 pixels from every edge.
- Messages have no length limit.
- Workbooks and CSV files (
xlsx,csv): up to 100 MB, added to Datasets. - Text files (
tsv,txt,md,json,tab): up to 1,000 KB, one per message. The chip counts lines up to 99,999. - Design documents (
pdf,docx): up to 10 MB. - Suggested chips show only on an empty conversation.
- The step list keeps the last 20 steps.
- The conversation reconnects after 60 seconds of silence, or after a 5-minute answer.
- 30 messages per minute per person. See Troubleshooting.
Related
- RIA's proposals: the cards between the conversation and the box
- Conversations: which conversation you're in
- Read a model's record: the record beside a model's conversation
- Troubleshooting: every error the conversation shows
- Find your way around: where the diamond sits in the window