River Logiceode docs

Models

Find any model you can see by search, sort, owner or what it needs, read its state from the row, and rename, pin, duplicate, share, delete or open it.

Where: Models

Models lists every model you can see, so you can find one, read its state and act on it without opening it. Ctrl/⌘+K → Go to Models gets you here from anywhere. The rail also lists your most recently opened models under Models.

New model, at the top right, starts a new one; see New Model.

Find a model

The header reads Models · and how many models are listed right now, after your search and choices.

ControlWhat it does
Search modelsEvery word you type must appear in the model's name, description, tags or owner's name. "price bakery" finds "Bakery price hike".
SortLast updated (the default), Newest, Name, Base figure (highest first; models without a solved Base last), Most scenarios or Group by category. Pinned models stay above the rest whatever the sort.
ShowWhich models are listed. See Show only some models.
OwnerWhose models are listed. It reads Everyone until you pick, then You, the owner's name, or {n} owners. Tick owners in the list; Everyone clears the pick. It shows only when the list holds someone else's model.

eode remembers your sort, your Show choice, your owner pick and your pins in this browser, per account. The search starts empty each visit. The owner pick also applies to the recent models on the rail.

Show only some models

Show narrows the list by state. Each choice carries a count, which follows your search and owner pick.

ChoiceModels in it
AllEvery model you can see.
PinnedThe ones you pinned with the star.
Needs youYour own models waiting on you: questions to answer, a design, mapping or data to check, numbers to load, a scenario to pick, or a build that stopped in the last 7 days.
Shared with my organizationModels shared with your whole organization. See Share and govern a model.
BuildingBuilding right now.
StoppedThe build stopped.
LockedLocked by anyone.
ScheduledA sync schedule that's turned on. Paused schedules aren't counted.

All, Pinned, Needs you and Shared with my organization are always offered. The other four appear only while a model is in them.

Group by category

Pick Group by category under Sort to split the list into one section per category. eode keeps the categories up to date itself; there's nothing to re-organize.

  • Each section is headed with the category's name and how many models it holds, like Bakery · 3.
  • Within a section, the most recently updated model comes first. Sections are in the same order: the one with the most recently updated model first.
  • Models with no category are listed after the sections, without a heading.

Read a row

Click anywhere on the row to open the model. From left to right:

  • The name, cut short with the full name on hover.

  • The facts line under the name, joined with dots:

    • Base cost unknown, when the Base solved but its cost can't be read;
    • the scenario count, not counting the Base: No scenarios yet, 1 scenario, 4 scenarios;
    • By you or By and the owner's name;
    • Copied from and the original's name, on a copy.
  • Accept structure, only on a model whose structure waits for you: it accepts the structure RIA wrote, then builds and solves the model.

  • Locked and Scheduled sync, small marks when the model has a lock or a sync schedule that's on.

  • The Base's figure, once the Base is solved, named for what it is: Profit, Cost, Present value, Revenue or Objective.

  • The status, one chip:

    StatusMeans
    BuildingImporting, mapping or solving right now.
    Needs youWaiting on you. Hover it for what it asks, for example "RIA has 2 questions for you."
    StoppedThe build stopped. Hover it for the reason, when there is one.
    Not solved yetThe Base has no solved figure yet.
    SolvedThe Base is solved.
  • Updated and how long ago, like Updated 2h ago. Hover it for the exact date and time. It hides in a very narrow window.

  • The star (Pin to the top / Unpin from the top) floats the model above the rest and adds it to Pinned. Pins are yours, in this browser.

  • … opens the row's menu. See Act on a model.

Act on a model

Click … on a row. The menu holds, in this order:

ItemWhat it does
RenameTurns the name into a box. Enter or clicking away saves, Esc cancels. An empty or unchanged name saves nothing.
DuplicateCopies the model. See Duplicate a model.
Share with my organization / Stop sharing with my organizationShares the model with your organization, or stops sharing it. Only for Org Admins and Promoters; see Share and govern a model. A locked model can't change its sharing: eode asks you to unlock it first.
HistoryOpens the model with its History section in view. See Versions and history.
Download .corzSaves the model's .corz file. Only for Org Admins, once the model has been built.
Model settingsThe model's lock, sync schedule, who can open it and audit log. See Change a model's settings.
DeleteDeletes the model. See Delete a model.

To change what's inside a model, open it; see Change a model. Every model, built or not, opens on its page: its conversation, with the record beside it saying where it stands; see Read a model's record.

Duplicate a model

Duplicate opens Duplicate “name”.

  1. Type a name in Name the copy. It starts as "{name} copy".
  2. "The copy carries the model and its Base. Add what else it should carry. You own everything copied." Tick what else goes with it under What-ifs, Workspaces and Workflows, one by one or with All what-ifs, All workspaces, All workflows. A section shows only when the model has something in it.
  3. If a workspace or workflow you ticked shows something you didn't tick, eode names it. Click Add and its name to bring that along too, or Show Base instead to have it show the copy's Base.
  4. Click Duplicate. It stays off until every such item is settled and the name isn't empty.

The copy opens when it's made. A large copy says "This copy is large, so it finishes in the background."

The copy belongs to you and starts unshared, unlocked and uncategorized, with the original's topology, KPIs and solved Base. Its row says Copied from and the original's name. You only need to be able to see the original, so you can copy a shared model you can't edit. If you already own a model with the copy's name, eode names it "{name} #2", "#3" and so on.

Delete a model

Delete asks Delete name?, says how many scenarios go with it, if any, and that "This cannot be undone." Click Delete to delete it.

Deleting removes the model and everything built on it: its scenarios, workspaces, workflows and their runs, and requests made on it. Only the owner or an Org Admin can delete; anyone else gets Could not delete and the reason. If someone else holds the model's lock, eode names them instead: only they can delete it, or their lock must be released first in Model settings. If you had the model open, you go back to Models.

Change a model's settings

Model settings opens Model settings: name. It shows only the rows you can use, and the menu offers it only when there's at least one.

RowWhat it doesWho sees it
LockedThe switch locks or unlocks the model. Locking asks why (optional), so whoever finds it locked knows. Once locked, it says who holds the lock. See Lock a model.The model's owner, Org Admins and Promoters
Scheduled syncSays where it syncs from, when it last synced and when it runs next, or Paused. Sync now rebuilds from the connected sources in the background, even while paused. The switch pauses or resumes the schedule without losing it.On a model with a sync schedule: its owner and Org Admins
Who can open itLists the people in each role on the model. See Share and govern a model.Org Admins
Audit logWho did what to the model. See Versions and history.Org Admins

Close or Esc closes it.

When an action fails

A dialog says Could not and the action, for example Could not rename Harbor Point Bakery — weekly plan., followed by eode's reason. A name you already use on another model reads: you already have a model named '{name}'; '{suggestion}' is free. When a lock is refused, a line at the top of the list says why and what to do; Dismiss clears it.

Pick the Base for an imported workbook

A workbook that holds several scenarios waits for you to pick one: its row reads Needs you, and hovering it says "Pick which scenario of your workbook to bring in." Click the row to open Pick the scenario to import. Each option shows the sheet it was found in, a confidence percentage and, for eode's best guess, Suggested. Pick one and click Import {name} as Base. Cancel, Esc or a click outside closes it.

When the list is empty

You seeBecause
Loading your modelsThe list is still loading. If it takes long, it reads This is taking longer than expected with Try again.
No models yet.You have no models and none are shared with you. "Describe your business to RIA, or bring in a file." New model starts one.
Nothing matches your search.The search found nothing. Clear search empties it and sets Show and Owner back to every model.
Nothing here matches what you chose to show.Your Show choice or owner pick left nothing. Show every model sets them back.
Your models could not be loaded.The list didn't load. "Check your connection, then try again." Click Try again. The count beside Models shows a dash.

Open a model from the command palette

Press Ctrl/⌘+K and type a model's name; it opens the model the same way clicking its row does. See Command palette.

Limits

  • You can't give two of your own models the same name; case and spacing are ignored. Duplicates are renamed "#2", "#3".

On this page